Use a lint free cloth. Apply the dressing on the leather item in a very thin coat. Allow the dressing 12-24 hours between applications to absorb into the leather. Number of applications varies based on original condition of leather. When completely absorbed, reapply. Repeat until a thin layer of dressing remains on the leather surface. Using a clean, dry, soft cloth, remove any excess dressing and gently buff the leather surface. This buffing action melts the blend of waxes into the topmost fibers to repel water and dust. Oils in the dressing moisturize the fibers to move smoothly against each other without binding and abrading. Thoroughly remove all extra dressing, taking special note of any seams or crevices. Properly buffed, you will not need to worry about the tint rubbing off after treatment of your leather items. Once the desired look is achieved switch over to Pecards Leather Dressing to maintain the leather as you would normally.